Auto Ignition Gas Stove Problems | Remedies

There are many reasons why your Auto Ignition Gas Stove may not work correctly. Some of them are Rusting of spark plugs, improper idling, or damaged Spark generators. Read on to discover why your Auto Ignition Gas Stove is not working correctly and learn how to fix various problems and their Auto Ignition Gas Stove solutions.

Auto Ignition Gas Stove Problems Remedies

Periodical Replacement Of Battery

The periodic replacement of batteries is a must for auto ignition-gas stoves. These devices are operated by batteries and placed behind the burner to avoid electrical issues near the gas. While most of these devices are battery-operated, some are manually used, and the batteries need to be replaced often. These stoves are generally more expensive and require more maintenance than manual ignition gas stoves.


You can check if the auto ignition gas stove has the correct type of Battery. Ensure the ignition system works correctly by turning the knob from OFF to SIM. This will create a spark beneath the burner.

Once the spark contacts the gas, the burner will ignite. To test your auto ignition gas stove, check the red button switch, the igniter, and the wiring connections.

If there are any problems, you can replace the battery, but make sure the igniter is not damaged. Most of the stoves require periodic replacement of batteries, so make sure to keep an eye on the working mechanism of stove batteries.

Rusting Of Spark Plugs

Rusting spark plugs in an auto-ignition gas stove is common and requires immediate attention. This condition can result in poor performance or even a broken head gasket. If you notice wet deposits on the firing tip of the spark plug, you should get the problem fixed as soon as possible. The problem can lead to severe consequences for the engine, including a compromised head gasket and a prosperous condition. To determine if your spark plugs are rusted, you should inspect them first.

Auto Ignition Gas Stove Problems Remedies


Spark plugs can be of two types: gasket-equipped and spark-plug-less. These Spark plugs with gaskets are folded steel with a smooth surface for sealing. Spark plugs with gaskets have tapered seat shells and machined threads to meet SAE standards. The electrode is made of nickel alloy steel, which is highly resistant to spark erosion, chemical corrosion, and massive temperature extremes. Spark Plugs are made up of metal equipment, so while washing or cleaning the gas stove, some drops may drop on spark plugs, due to which rust can occur. So make sure not to use too much water while cleaning the gas stove.

The Spark Generator may get Damaged

When you use an auto-ignition gas stove, you may encounter problems with the Spark Generator. Spark generators supply the spark plug with electricity, creating a flame. When this element gets damaged, the stove will be unable to produce a spark. This will affect the other rings, and a new Spark Generator is required. However, you may be able to save money by repairing the Spark Generator yourself.


If there is no spark when the stove is turned on, the Piezo ignition system is out of order. Other causes include a defective switch or a loose wiring connection. If you cannot determine the source of the problem, you can try swapping a working burner control knob for the faulty one. If this does not solve the problem, you should try to fix the malfunctioning Spark Generator and replace the damaged unit.

The battery gets discharged frequently due to shorting.

If your auto ignition gas stove’s Battery gets discharged frequently, it may have a faulty safety valve. The valve can prevent the Battery from exploding, but the process may cause the electrolyte to leak. Also, the Battery may be receiving mixed usage, causing it to overcharge one of the batteries. Additionally, two different types of batteries may cause the other Battery to discharge excessively.


Ensure that you’re using the same brand, size, and expiration date for new and used batteries to prevent these problems. Using different batteries can cause the batteries to discharge over time, leak, explode, or both. The Battery should be adequately disconnected after use, and the batteries should have the same brand and size. If the batteries are not the same type or model, check the labels.

Must be careful while washing and cleaning the Ignition Gas Stove

Before washing and cleaning the auto ignition gas stove, be sure to disconnect the appliance from the mains. There may be specific instructions for removing the gas pipe visible on your gas stove’s manual. If you have a removable ceramic disc that helps disperse the flames, you should remove it first. Next, remove the burner head. Be careful not to damage the venturi tube, particularly if you have an auto-ignition gas stove. Click here to learn How to Clean a Gas Stove.


During cleaning, you must remove the burner caps and grates. You can also use a safety pin or paper clip to remove food particles and debris from these ports. Make sure to switch off the gas stove using the control lock. Ensure to clean the stove thoroughly, as this will involve removing the burner guards and cleaning the stovetop. Depending on the model, you may want to use a degreaser to loosen food particles.

The Switch may get stuck sometimes.

A click or clicking sound can be heard when using your gas stove. This can occur if something spills onto the burner or the control knob. Disconnect the power source and wipe off any excess moisture from the area. In some cases, the spark ignition switch may need some time to dry before igniting the burner. If you do not notice this problem within a few minutes, a spark ignition switch may be the cause.


If the problem persists after checking the connections, you may need to replace the igniter. To replace the igniter, you will need to remove the burner head, turn it upside down, and disconnect the wires from the old spark igniter. You should be able to remove the old spark igniter easily with a Phillips head screwdriver. Be sure to clean out any debris from the burner head after removing the old igniter.


Before replacing your igniter, you must know the causes of the problem. If you can’t get the gas to ignite, you need to check the burners. You can clean them with a toothbrush or a scrubbing pad. If the igniter isn’t firing, you can also use a straightened paper clip to remove debris from the port openings. If this still doesn’t work, use a baking soda paste. You should then rinse and air-dry the parts. Finally, you can reassemble them and test the stove. If you’re replacing the ignition or igniter, you need to consult the manual for further instructions.

I hope our article helps you resolve your Auto Ignition Gas Stove Problems, and if you would like to explore more about gas stoves, don’t forget to check out the other articles.

Note: While replacing the auto ignition gas stove parts, maintain the safety protocols to prevent unwanted circumstances.

Frequently Asked Questions ( FAQs )

Q1. What to do if Auto Ignition Gas Stove Sparks are not White?

Answer: If the sparks are not white, then the igniter is defective. If you suspect this, you need to replace the igniter or the valve. Make sure you purchase a new one that is compatible with the model of your stove. Also, do not lean too far into the burner compartment while troubleshooting. In spontaneous firing, it is essential to contact a professional or appliance service.

Q2. How to protect the Autoignition Gas stove from water damage?

Answer: This is a common problem with an auto-ignition gas stove is water damage. If you do not take care of it, you may have a non-functioning stove. Water damage can cause the ignition switch to a short circuit, leading to an explosion. If the plug is damaged, you should replace it immediately. However, if the stove continues to spark, you should consult a maintenance specialist.

Q3. How to Control the Auto Ignition Gas Stove?

Answer: The ignition control is the next common cause of gas stove problems. A shorted wire can make the flame in your stove ineffective. To fix this, you can purchase a spark-ignition tester. Most gas stove ignition controls are connected to conductors through connectors. You can remove the plugs to release the contacts and use a tester to check for short circuits. The tester will display a reading on a scale. Short circuits can occur when a metal oxide junction contacts the ignition control contacts.

Q4. How to Resolve a Defective Thermal Sensor in an Auto Ignition Gas Stove?

Answer: A defective thermal sensor is another common problem with gas stoves. Besides the thermocouple, several other components can fail to work. Check the igniter wire connectors if you can’t locate the ignition fuse. If the wire connectors are wet or dirty, they may have shorted, and the gas will not ignite properly. This could result in an inconsistent ignition and a dangerous electric shock.


Auto Ignition Gas Stove Advantages and Disadvantages

What is An Auto-ignition Gas Stove

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You cannot copy content of this page